Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Roslindale?
Garage door repair in Roslindale typically costs $150 – $600, depending on which part failed and how much of the door system needs to come apart. A single broken spring is at the low end ($180 – $340), a snapped cable runs $130 – $250, and a full new door installed lands between $700 and $2,200. Those are estimated ranges for the Roslindale market in 2026, and the written estimate we give you after we look at the door is the price that stands.
We’re a garage door specialist, not a general handyman who squeezes doors in between other jobs. Everything on this page – repair, opener systems, springs, full installations, parts – is what we do all day, and it’s why we can usually tell you the problem on the first visit instead of guessing at it. Call (844) 944-1933 and we’ll book a free estimate.
Key Takeaways
- Most garage door repairs in Roslindale fall between $150 and $600.
- Springs are priced per spring. A matched pair costs roughly double, because they’re replaced together.
- Our technicians have up to 14 years of experience, and they work on eight major brands without trial and error.
- The written estimate, after we inspect the door, sets the final price. No surprises added later.
Garage Door Cost Breakdown (2026)
Here’s what each common job runs in Roslindale. Treat these as typical estimated ranges, not a fixed quote. Every door is a little different, and the only number that counts is the one on your written estimate.
| Service | Typical Estimated Cost |
|---|---|
| Garage Door Repair (general) | $150 – $600 |
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Opener Repair | $120 – $320 |
| Opener Installation | $250 – $550 |
| Panel Replacement | $250 – $500 |
| Track Realignment | $120 – $240 |
| Roller Replacement | $110 – $220 |
| New Door Installation | $700 – $2,200 |
One thing worth saying plainly: a torsion or extension spring price above is for a single spring. Springs almost always fail in matched pairs, so if yours both went or the second one is right behind the first, expect about twice that range for the pair. We’ll tell you which situation you’re in before we start.
What pushes a job toward the top of a range? A door that’s been binding for months wears several parts at once, so you might be paying for rollers, a track adjustment and cables together. Weather and age matter too. Roslindale sits in a part of Massachusetts that swings from humid summers to hard freezes, and that freeze-thaw cycle works metal parts – springs, hinges, rollers, the cables that run with them – more than a mild climate does. A door on a south-facing wall gets sun all day and bakes the finish and the rubber seals. None of that means a door is doomed; it just means a door here wears in predictable ways, and a technician who sees hundreds of them knows where to look first.
What Affects Garage Door Pricing in Roslindale
Pricing isn’t arbitrary. Six things move the number up or down, and knowing them helps you read an estimate fairly.
- Which part failed. A roller swap is a small job. A snapped torsion spring is a bigger one because it’s dangerous to work on and takes real care to reset safely. The part itself is what separates a $110 job from a $340 one.
- Spring type and count. Standard torsion springs cost less than high-cycle ones built for heavy use. And if you replace the pair, the labor is shared, so the second spring costs far less than the first as part of the same visit.
- Opener brand and model. We’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, so we know what board, motor or wall control each one takes. Brand-specific knowledge cuts down on trial-and-error sourcing and repeat calls, and that keeps your bill honest instead of padded with a second visit.
- Door condition and what’s attached to it. A door that’s out of balance wears its opener harder. Repairing the door so it moves freely under hand pressure can spare the motor a slow death – which is why diagnosing the whole system on the first visit saves money over time.
- Panel damage. A dent or crack in a single panel runs $250 – $500, but only if the panel is available. On older or discontinued doors a panel match can be the deciding factor between a repair and a new door.
- New installations. Size, insulation, window inserts and whether the opening itself needs attention all land inside the $700 – $2,200 range. A standard single-car door on an existing opening sits at the low end. A wider, insulated double with windows climbs.
The good news about living here: neighborhoods like Roslindale Square, Roslindale Village and the streets around Bellevue Hill and Washington Street are full of houses with older, established garages on narrow drives, and those doors are usually serviceable. Most of the time the choice is repair, not replace – and a specialist should tell you that even when a new door would be the bigger sale.
Repair or Replace? How to Decide
Repair is usually the better call when the door structure is sound and one or two parts have failed. Replace when the cost of fixing climbs close to the price of a new door, or when parts are simply gone.
Here’s the practical line most homeowners draw. If the door is dented, loud, or not opening right, and the frame and panels are intact, a repair in the $150 – $600 range almost always wins. If a single panel is cracked and the model is discontinued, or several panels are failing at once and pushing past $500, a new door at $700 – $2,200 starts looking like the smarter spend because you get modern insulation and a fresh finish along with it. A door that’s just old but working fine isn’t a problem to solve – it’s a door doing its job.
One honest note: springs, cables and the parts under tension are genuinely dangerous. If a spring snaps, don’t try to lift or force the door, and don’t attempt the swap yourself. These parts store enormous force, and people get hurt on them every year. Call a trained specialist and let them handle it. We work on springs as part of what we do every day, and we take them seriously.
How to Save on Garage Door Cost in Roslindale
There isn’t a secret discount. The savings come from doing a couple of things right.
- Fix the small thing before it becomes the big thing. A noisy door or a roller that’s grinding is a cheap repair now and an expensive one if it takes the cables and track with it.
- Do matched parts in one visit. Replacing both springs together costs less than two separate service calls, since the labor is shared.
- Get a real diagnosis, not a guess. When a technician knows your brand and finds the actual fault on the first call, you stop paying for return visits.
- Ask for the free estimate. We’ll look at the door, tell you what it needs and what it doesn’t, and put the price in writing before any work starts. That’s how you avoid being sold a new door you didn’t need.
We can also work with your insurer if a damaged door is part of a larger claim, and we supply parts directly if you’re handy and want to handle a simple piece yourself. No pressure either way.
Why Brand Knowledge and Specializing Matters on the Price
A door system is a set of parts that talk to each other – springs, cables, tracks, rollers, hinges, and the opener driving it all. When something goes wrong with a LiftMaster opener, a Clopay panel or a Wayne Dalton door, the diagnosis is faster when your technician has worked on that exact line before. We’re certified to service and repair eight of the most widely installed garage door and opener brands in the country, and that means we don’t guess. We also keep parts available directly, so a repair isn’t stalled waiting on a third-party order.
Being a single-trade specialist is part of it too. Garage doors are all we do. That focus is why we can own the dangerous jobs – torsion and extension spring work especially – that general handymen often decline. It’s also why you don’t get bounced to a second contractor halfway through. One call covers everything from a broken spring to a full new door. You can read more about everything we handle on our Roslindale Garage Door Repair page.
FAQs – Garage Door Cost in Roslindale
How much does a garage door repair cost in Roslindale?
Most garage door repairs in Roslindale cost $150 – $600, depending on the part that failed. A small roller or cable fix sits near the bottom; a spring job near the top. Call (844) 944-1933 for a free estimate that pins the number down for your specific door.
How much does spring repair cost in Roslindale?
Spring repair in Roslindale runs $180 – $340 for one spring, and about double that if both matched springs are replaced together. Springs usually fail as a pair, so we’ll tell you which you’re facing before we start. Call (844) 944-1933 – estimates are free, and we take spring safety seriously.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper, and it’s often the right call: most fixes land in the $150 – $600 range versus $700 – $2,200 for a new installed door. Replacement makes more sense when a panel is gone or several parts are failing past $500 at once. Call (844) 944-1933 and we’ll give you a straight answer.
How much does a new garage door cost installed in Roslindale?
A new garage door installed in Roslindale typically costs $700 – $2,200, based on size, insulation, windows and whether the opening needs work. A standard single door on an existing opening sits at the low end. Call (844) 944-1933 for a free on-site estimate.
Why do prices vary so much between quotes in Roslindale?
Prices vary because doors and part quality differ, and because some quotes leave out labor or a second spring. A spring quoted per-pair versus per-spring changes the number fast. Get an itemized written estimate, and call (844) 944-1933 for a free one you can compare line by line.
Can you match a brand I already have?
Yes. We service and repair LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor equipment, so we know the parts your door takes. That’s exactly what keeps a repair from dragging into a second visit. Call (844) 944-1933 to confirm your model.
Where the Money Goes, and How to Get the Right Number
The whole point of a price guide is to give you a real range so nobody can quote you blind. In Roslindale, the honest span is $150 – $600 for a repair and $700 – $2,200 for a new door, with the specific job – spring, cable, opener, panel, track, rollers – landing somewhere inside it. Anything a technician quotes above those lines deserves a reason, and anything below usually hides a part or a second spring in the fine print.
We’d rather spend ten minutes looking at your door and tell you the real answer than hand you a ballpark over the phone. If your door is grinding, sagging, stuck, or making a sound it didn’t used to make, don’t force it – call us, and we’ll get eyes on it and give you a written estimate for free. Call (844) 944-1933 for a free estimate in Roslindale.
Pricing reflects the Roslindale market as of 2026. Roslindale Garage Door Repair offers free estimates – call (844) 944-1933.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Colleen Norris"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Travis Rhodes"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Dustin Gallagher