Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Parts Across Hyde Park
If a spring snapped, a cable frayed, or a roller started grinding, you need the right part more than a pep talk. We supply and fit garage door parts for homeowners across Hyde Park, and we know the local stock well: the older single-family homes, the tight side clearances, the garages built smaller than anything today’s catalog assumes. That matters here because a parts swap in Hyde Park is rarely a simple match. Call (844) 944-1933 and we’ll get a trained specialist to your door with a free estimate, a quoted price before any work, and a clear answer on what your door actually needs.

Why Hyde Park Homeowners Call Roslindale Garage Door Repair for Garage Door Parts
Garage doors are the only thing we do, and that focus shows up in how we diagnose a Hyde Park door. Our technicians have up to 14 years of experience and work on the equipment from eight major brands, so a problem with a Clopay carriage-house door or a Genie opener gets read correctly the first time rather than tested by trial and error. We supply parts on their own if you’re handling a repair yourself, and we fit and install them if you’d rather not.
We serve Hyde Park and know the neighborhoods. Whether you’re off River Street, up near Cleary Square, or on one of the quieter blocks toward Readville, a broken spring or locked-up track is a security problem as much as a mechanical one, and we treat it that way. Call us and we’ll book you in, price the job up front, and agree the figure with you before anyone picks up a tool.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Parts Services in Hyde Park
Torsion Spring
Torsion springs carry the weight of the door, and when they fail the door stops dead or slams down. In Hyde Park’s older homes, a wooden carriage-house door on a low-header garage often starts dragging because the original torsion spring has lost its tension after years of freeze-thaw cycles, and the door’s non-standard width means replacement springs must be custom-wound. A qualified technician typically measures the door’s weight and drum size, checks track alignment and end bearing plates, and installs high-cycle springs rated for 25,000 cycles or more to match the door’s premium build. This is dangerous work; we don’t hand out DIY spring steps, because a loaded torsion spring can cause serious injury. Spring repair in Hyde Park typically runs $180 – $340 for one spring, and a matched pair costs about twice that.
Cables & Drums
Cables and drums work alongside the springs, and on settled Hyde Park tracks they’re often the first thing to wear unevenly. If a door goes up crooked or feels heavy on one side, the cable is usually stretched or slipping on the drum. We replace matched cable sets and drums so the door lifts evenly again. Cable repair in Hyde Park typically runs $130 – $250.
Weatherstripping
Boston’s humid continental climate means Hyde Park doors face cold, snowy winters and humid summers, so the bottom seal takes a beating every year. A worn seal lets snow, slush, and drafts under the door, and it can let water pool where the frame meets the floor. We fit ice-dam-resistant bottom seals built for the temperature swings here, so your garage stays dry across the seasons.
Rollers & Hinges
Early steel doors on settled tracks often develop misaligned rollers and hinges, which strain the opener and make the door noisy and unbalanced. On Hyde Park’s closely-spaced homes with tight side clearances, those small parts have less room to work. We swap rollers and hinges for the right size and get the door running quiet again. Roller replacement in Hyde Park typically runs $110 – $220.
Trusted Brands We Service in Hyde Park
We’re factory-familiar with eight of the most widely installed garage door and opener brands, and we work on yours by name. LiftMaster and Chamberlain openers, Clopay and Amarr steel and carriage-house doors, Genie, Wayne Dalton, Craftsman, and Raynor all turn up in Hyde Park’s older and newer homes. That brand knowledge means we source correct parts without guesswork and don’t bounce you to a second contractor. When a part is needed, we know the spec and can order or modify it to fit the opening in front of us. Call (844) 944-1933 to book a free estimate.
Common Garage Door Parts Problems We See in Hyde Park Homes
- Warped wooden carriage-house doors. Freeze-thaw cycles warp the wood, which causes binding and uneven spring tension that standard springs can’t compensate for. A premium door needs parts matched to its actual weight, not a catalog guess.
- Low-header garages driving non-standard sizes. Many Hyde Park garages were built for Model T – era cars and have openings under 7 feet, so a standard 7-foot sectional door and its hardware won’t fit. Parts have to be custom-ordered or modified, and even a torsion spring may need sizing for a lighter, lower door.
- Misaligned rollers and hinges on settled tracks. On older homes the tracks settle with the house, and early steel doors end up strained and noisy. The rollers and hinges wear faster because the geometry is off.
- Worn bottom seals from the seasons. Snow loads and humid summers work the bottom seal loose, letting ice and drafts under the door where the frame meets the floor.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Parts in Hyde Park, MA
Here’s what parts work typically runs in Hyde Park. These are estimated ranges for the Hyde Park market, and the written estimate we give you sets the final price.

| Job | Typical estimated range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Roller replacement | $110 – $220 |
What moves a price up or down: whether a spring has to be custom-wound for a non-standard door, whether a matched pair is replaced together (about twice the one-spring range), and whether a low-header opening needs modified hardware. We quote and agree the price with you before any work starts, so the figure on the estimate is the figure you can plan around. Estimates are free.
We Also Serve Cities Near Hyde Park
We take on garage door parts work around the area, including Roslindale, Mattapan, West Roxbury, and Milton. The same precision-fit approach carries over to each. If you’re nearby and your door needs parts or repair, call us and we’ll talk through what’s involved. Our garage door parts team handles the full range, from a single roller to a custom-wound spring.
Serving Hyde Park, MA – Our Local Coverage Area
We serve Hyde Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Parts in Hyde Park
Probably not as an off-the-shelf match. A standard torsion spring is sized for a standard-height door, and the lighter, lower doors common in Hyde Park’s Model T – era garages often need a custom-wound spring sized to the door’s actual weight. Call (844) 944-1933 for an exact quote; estimates are free.
An ice-dam-resistant bottom seal is the right call for this climate. The temperature swings here are hard on seals, so we fit a seal rated for the freeze-thaw cycle rather than a light-duty one. Call us and we’ll match a seal to your door.
It depends on how far the warp has gone. Sometimes custom-sized springs and realigned tracks restore smooth operation; sometimes the wood has moved enough that repair no longer pays. We’ll assess it honestly at the free estimate and tell you which way to go. Call (844) 944-1933 to book.
There’s no fixed calendar, but the freeze-thaw cycles here shorten spring life. Higher-cycle springs rated for 25,000 cycles or more hold up better, and a matched pair should be replaced together. If your door feels heavy or sluggish, call and we’ll check the springs.
Yes. We service LiftMaster, Chamberlain, and the other major brands, and we check that the opener rail and photo-eye sensors are properly integrated with smart-home systems so the door runs quietly. Call (844) 944-1933 and we’ll arrange a visit.
Ready to Get Your Door Working Again?
Whether it’s a snapped spring, a frayed cable, or a bottom seal that’s given up, we’ll diagnose it, supply the right part, and fix it in one visit where we can. Call (844) 944-1933 for a free estimate on garage door parts in Hyde Park. We quote the price and agree it with you before any work starts.
Written by the team at Roslindale Garage Door Repair.