Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Roxbury?
Garage door work in Roxbury typically runs $150 – $600, depending on whether you need a repair, a spring replacement, or a full new door. A straightforward repair like a cable or roller fix usually lands at the low end, while a new door installation is a bigger project with a bigger range. The written estimate is what sets your final price, so treat these ranges as a planning number, not a quote.
We’re Roslindale Garage Door Repair, and garage doors are the only thing we do. No siding, no decks, no general handyman work. That single focus matters when you’re pricing a job, because it means the person looking at your door has seen your brand and your problem before. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment. Our technicians have up to 14 years of experience.
Key Takeaways
- Most garage door repair jobs in Roxbury fall between $150 and $600.
- Spring repair is $180 – $340 for one spring. A matched pair is usually replaced together, so a pair costs about twice that.
- Opener installation runs $250 – $550; opener repair is $120 – $320.
- New door installation is $700 – $2200, depending on door size, material, and hardware.
- Estimates are free. Call (844) 944-1933 and we’ll look at the door and give you a number.
Garage Door Cost Breakdown (2026)
Here’s how the numbers break down by job type for the Roxbury market. These are typical estimated ranges, not a fixed menu. A door that’s been patched a few times, a triple-wide opening, or a brand we don’t see as often can move the number. The written estimate is the price you pay.
| Service | Typical Estimated Range |
|---|---|
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
| General garage door repair | $150 – $600 |
What pushes a job toward the top of its range? Parts that have to be ordered rather than sourced locally, doors that have settled out of square in an older building, and anything that turns out to be two problems instead of one. A snapped cable often travels with a bent track. A dead opener frequently sits on a door with worn rollers. When we diagnose on the first visit, we quote the whole picture instead of sending you back for round two. That’s the difference between a cheap first bill and a low total cost.
A spring price is for one spring. Torsion and extension springs are usually replaced as a matched pair because a new spring next to a tired one loads unevenly, and the older one tends to fail next. So budget roughly double the single-spring range when both go.
What Affects Garage Door Pricing in Roxbury
Roxbury is a dense, older neighborhood, and the housing stock shapes the work. A lot of the doors here sit on two- and three-family buildings, garages that were added later, and alleys where the clearance is tight. That shows up in the price in a few predictable ways.
- Door size and type. A single-car door is a smaller job than a double. Sectional doors, carriage-house styles, and anything with window inserts cost more in parts, and panel replacement pricing follows the panel you need.
- Brand and part availability. We’re factory-familiar with eight major brands, including Clopay, Amarr, and Wayne Dalton. When we know the brand up front, we can quote accurately and avoid the trial-and-error that turns one visit into three.
- Age of the door and hardware. Older doors in Roxbury’s triple-deckers and converted carriage houses often have hardware that’s been repaired piecemeal. Rusted hinges, seized rollers, and tracks that were bent and bent back all add labor.
- Access and clearance. A garage that opens onto a narrow alley or sits tight against a fence line slows the job down. So does a low header that limits how the door can be worked on.
- Whether it’s repair or replacement. A single broken component is a repair. A door that’s cracked across multiple panels, or one where the tracks and hardware are all failing, is often better replaced. We’ll tell you honestly which side of that line you’re on.
- New England weather and seasonal wear. Freeze-thaw cycles work on door seals, thresholds, and the concrete the tracks sit on. Snow and ice buildup can bend a bottom section or throw a door off its track. That kind of damage is common in Roxbury winters and it’s a repair, not a replacement, most of the time.
How to Save on Garage Door Costs
You don’t need to spend the top of the range to get a door that works. A few practical moves keep the bill down without cutting corners on safety.
- Fix the small stuff before it snowballs. A squealing roller or a slightly misaligned track is a cheap fix now. Left alone, it wears the opener and the door panels and turns into a bigger job.
- Get the diagnosis right the first time. Repeat service calls are where money disappears. Because we work on all eight major brands, we diagnose accurately on the first visit instead of guessing at parts.
- Ask about parts supply. If you’re handy and the repair is a safe one, we can supply the individual component so you’re not hunting for it at a big-box store. For anything involving springs or cables, leave it to a technician.
- Bundle related repairs. If the cable and the rollers are both done, it’s one visit and one labor charge instead of two. Call (844) 944-1933 for a free estimate and we’ll tell you what should be done together.
- Know when replacement beats repair. Putting $500 of repairs into a door that’s reached the end of its life is money you won’t get back. We’ll say so plainly if that’s the case.
Spring Repair, Cable Repair, and Why They Cost What They Do
Springs and cables are the two parts of a garage door that carry real risk. A torsion spring under tension can cause serious injury if it’s handled wrong, and a snapped cable whips with enough force to break a hand. This is the work general handymen often decline, and it’s the reason we lead with it. Spring repair in Roxbury runs $180 – $340 for a single spring, and cable repair is $130 – $250.
We don’t walk homeowners through replacing a spring or a cable themselves. It’s not a safe job for anyone without the right tools and training, and a mistake here can be serious. What we can do is explain what’s happening, show you the failed part, and get it fixed. Our spring work is handled by trained specialists, not a rotating generalist, because this is exactly the kind of job where experience matters most.
For less hazardous work, we’re glad to explain the process. Roller replacement is $110 – $220, and it’s one of the simplest ways to quiet a noisy door and take strain off the opener. Track realignment runs $120 – $240. If a door has jumped its track but the panels are intact, realignment is often all it needs.
Opener Repair and Installation Costs
Openers are the electronic side of the door, and they fail in predictable ways. A remote that stops working, a motor that hums but won’t lift, a safety sensor that keeps the door from closing. Opener repair in Roxbury is typically $120 – $320. If the unit is old enough that parts are scarce or the motor is worn out, a new opener installed is $250 – $550.
Brand knowledge cuts down on guesswork here. We service LiftMaster, Chamberlain, Genie, and Craftsman openers regularly, along with the doors they’re paired with. When we know the model, we know the failure points. That’s why so many opener calls get diagnosed and fixed in one visit.
Panel Replacement and New Door Installation
Sometimes the door itself is the problem. A cracked panel, a dent from a car bumper, or a section that’s rotted at the bottom from years of Boston-area weather. Panel replacement is $250 – $500, and if only one section is damaged, that’s usually far cheaper than a whole new door.
When the whole door needs to go, new door installation runs $700 – $2200. The range covers a basic single-car door up to a larger double door with window inserts and upgraded hardware. We install doors from Clopay, Amarr, Wayne Dalton, and Raynor, so you have real choices on material, insulation, and style without being steered to whatever’s sitting in a warehouse. For a fuller look at that side of the work, see garage door installation in Roxbury.
When to Repair and When to Replace
This is the question homeowners ask most, and it has a fairly clear answer. If the door structure and panels are sound and the failure is a single component, repair is almost always the better value. A $200 spring repair on a door that’s otherwise fine is money well spent. If multiple panels are cracked, the tracks are bent beyond realignment, or the door is sagging because the structure has given out, replacement makes more financial sense.
We don’t push replacement when a repair will do. That’s the whole point of a specialist: we know the difference and we’re not paid to upsell you a door you don’t need. If you’re weighing it, call and we’ll give you a straight answer with a free estimate.
Why a Garage Door Specialist Costs Less Than You Think
A generalist has to figure out your door from scratch. A specialist already knows it. That’s not a slogan, it’s labor hours. When we arrive and recognize the brand, the model, and the failure pattern, the diagnosis is faster and the fix is right the first time. Fewer repeat visits means a lower total cost even if the hourly number looks similar.
We also cover the full spectrum under one roof: repair, opener systems, spring replacement, installation, and individual parts. You’re not bounced to a second contractor for the opener or a third for a panel. And with parts supply as a standalone service, a repair doesn’t sit waiting on a third-party order.
If your door needs work and you want a number, we connect you with a vetted local professional who is licensed and insured as their state requires. Estimates are free and pricing is upfront. Call (844) 944-1933.
FAQs – Garage Door Cost in Roxbury
How much does garage door repair cost in Roxbury?
Garage door repair in Roxbury typically runs $150 – $600, with most single-component fixes landing in the lower half of that range. Spring repair is $180 – $340 for one spring, and cable repair is $130 – $250. Call (844) 944-1933 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper when the panels and structure are sound and only one part has failed. Replacement makes more sense when several panels are damaged or the door’s structure has given out. New installation is $700 – $2200, so a single-part repair is almost always the lower bill when the door is otherwise healthy. Call (844) 944-1933 and we’ll tell you which you’re looking at.
How much does a new garage door opener cost in Roxbury?
An installed opener runs $250 – $550, while repairing an existing one is $120 – $320. If your current unit is failing but repairable, repair is the cheaper route. Call (844) 944-1933 for a free estimate.
Can you come today for a broken spring or cable?
Spring and cable failures are urgent and we treat them that way, with same-day service where the schedule allows. A single spring is $180 – $340 and a cable repair is $130 – $250. Call (844) 944-1933 and we’ll get you booked – fast dispatch runs from 7am to 7pm.
Why is spring repair priced per spring?
Because one spring is one unit of work, and a matched pair costs about twice a single spring. Springs are usually replaced in pairs since a new spring beside a worn one loads unevenly. That’s why we quote the single-spring range of $180 – $340 and double it for a pair. Call (844) 944-1933 for an exact estimate.
Getting a Straight Answer on Your Door
Pricing a garage door shouldn’t feel like a negotiation with a used-car lot. You want a clear number, a straight answer on whether to repair or replace, and someone who knows your brand well enough to fix it the first time. That’s what we do, and garage doors are all we do.
Call (844) 944-1933 for a free estimate. We’ll look at the door, explain what’s wrong, and give you an upfront number before any work starts.
Pricing reflects the Roxbury market as of 2026. Roslindale Garage Door Repair offers free estimates – call (844) 944-1933.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Colleen Norris"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Travis Rhodes"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Dustin Gallagher