Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Newton?
Garage door repair in Newton typically costs $150 – $600 for most jobs, with simple fixes near the low end and multi-part repairs climbing toward the top of that range. Spring repair runs $180 – $340 for one spring (a matched pair is usually replaced together, so it costs about twice that), and a brand-new door installation ranges from $700 – $2,200. Those are estimated ranges for this market. A free on-site estimate is what sets the actual price.
We’re Roslindale Garage Door Repair, a residential garage door specialist. We repair, replace, and supply parts for the eight brands most often installed in Newton homes. Garage doors are all we do, so you don’t get bounced to a second contractor when a job turns out bigger than it looked on the phone.
Key Takeaways
- Most Newton garage door repairs land between $150 and $600.
- One spring: $180 – $340. A matched pair is about double, since both springs are replaced together.
- Opener repair is $120 – $320; a new opener is $250 – $550 installed.
- A full new door runs $700 – $2,200 depending on size, material, and whether the track and opener get replaced too.
- We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Brand familiarity means accurate diagnosis and no part-sourcing delays.
- Free estimates: call (844) 944-1933.
Garage Door Cost Breakdown (2026)
Here are the typical estimated ranges for the most common garage door jobs in Newton. Every number below is a range, not a fixed quote. The written estimate after we see the door is the price that applies.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
What pushes a job toward the high end? Usually the number of parts involved, not one big-ticket item. A jammed door that bent two panels, snapped a cable, and pulled the track out of line is three repairs stacked on one visit. A single stretched spring is the opposite: one part, one labor charge, done. Doors from the 1970s and 1980s are common in Newton’s older housing stock, and those often use extension springs instead of modern torsion systems, which can change how a repair is approached. A door that hasn’t been serviced in many seasons tends to need more than the part that finally failed.
Door size and material also move the installation number. A standard single-car door sits toward the low end of the $700 – $2,200 range. A wider double door in a heavier material, or one that needs a new opener at the same time, lands near the top.
What Affects Garage Door Pricing in Newton
Cost isn’t only the part. These are the factors that move the estimate most often in Newton.
- Type of failure. A broken roller is a small job. A failed torsion spring, snapped lift cable, and misaligned track in one visit is a larger one. We price each part and each bit of labor separately so you can see where the money goes.
- Spring type and count. Older Newton homes still running extension springs are priced differently from homes with a modern torsion bar. A matched pair costs about twice the single-spring rate, because both are replaced together.
- Door age and housing stock. Newton has a lot of older two- and three-bay garages where the door hardware has outlived its original install. Rusted hinges, worn drums, and fatigued springs often show up in the same visit. Expect more from a door that hasn’t been touched in a long stretch and less from one that’s been serviced recently.
- Brand and parts availability. Because we handle LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, we know which parts cross over between models and which don’t. That keeps a repair to one trip instead of a diagnosis followed by a return for a special-order component.
- Panel versus full door. A single damaged panel is $250 – $500 to replace. If the door is older and the panel color or profile is no longer made, replacing the whole door can make more sense than chasing a discontinued part.
- Opener condition. Sometimes the door is fine and the opener is the problem. Opener repair at $120 – $320 is often the cheaper path; a full opener install at $250 – $550 is the call when the unit is at the end of its life.
How to Save on Garage Door
There’s no coupon to chase here. The savings come from knowing what you’re paying for and catching small problems before they turn into big ones.
- Get a free written estimate before work starts. We look at the door, tell you what failed and what didn’t, and give you the number up front. Call (844) 944-1933 to set it up. No charge, no obligation.
- Ask for an itemized quote. If a quote is one lump sum with no breakdown, you can’t tell whether you’re paying for a spring, a cable, or both. Ask what each part costs, and what each costs to install.
- Fix the small thing first. A squealing roller ($110 – $220) that gets ignored can wear the track and stress the opener. Handling it early is almost always cheaper than the stack of repairs that follows.
- Hold off on full replacement until it’s justified. A single panel, a track realignment, or an opener repair can usually keep a good door in service. Replacement is for structural damage, a door that’s beyond economically repairing, or a panel that can’t be sourced anymore.
- Match the repair to the diagnosis, not the sales pitch. If the spring is the only thing broken, you pay for the spring. We don’t stack on work the door doesn’t need.
Spring Repair and Safety in Newton
Torsion and extension springs and the lift cables that run alongside them are under extreme tension, and they’re the most dangerous parts on a garage door. A failed spring or snapped cable can whip loose and cause serious injury. We don’t recommend homeowners attempt spring or cable work themselves, even with an online tutorial. If a spring has broken, stop using the door, keep it closed if you can, and call a trained technician. Spring repair is one of the areas where we specialize: our technicians have up to 14 years of experience on torsion and extension systems, and we treat the job as the hazardous work it is. A creaking or sagging door can wait a day. A door with a visible broken spring, a hanging cable, or a door that sits crooked should be left alone until someone qualified takes a look.
Repair or Replace: Which Makes Sense?
Repair is usually the right call when the door itself is sound and one component failed: a spring, a cable, a roller, a track knocked out of line, or an opener that’s acting up. At $110 – $340 for most single-part repairs, you’re keeping a door that’s still in good shape. Replacement makes more sense when the door is structurally compromised (a bent or rotting main panel that can’t be sourced), when the hardware has failed across several years at once, or when you want a different style or material and the repair cost would approach a large fraction of the installation range. A single-panel replacement at $250 – $500 is often the middle path: it fixes a damaged section without replacing the whole door.
Not sure which way to go? A free estimate from us includes an honest read on both options, including what a repair gets you and when it stops being worth it. Call (844) 944-1933.
Why Brand Familiarity Keeps the Price Honest
A specialist who works on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor openers and doors every day doesn’t spend half a visit guessing which part fits. That familiarity is why spring, cable, and opener repairs are quoted from ranges we can stand behind. It also means we can supply individual parts directly when you want to handle a simpler repair yourself, or when a return visit needs a component we can source without a third-party delay. One call covers the door, the opener, and the parts.
What Makes a Newton Garage Door Estimate Fair
A fair estimate is written, itemized, and based on the door in front of the technician, not a phone guess. COVID-era supply chain habits faded, but some contractors still pad estimates “just in case.” We don’t. You’ll see the spring cost, the labor, and the parts, and if the diagnosis changes once we’re on-site, we tell you before doing the work. Newton’s mix of older garages and newer builds means a door might be a modern torsion setup or an older extension system, and the estimate should reflect which one it is. Ask for the breakdown in writing and hold any contractor to it.
FAQs – Garage Door Cost in Newton
How much does garage door repair cost in Newton?
Most garage door repairs in Newton run between $150 and $600. Simple jobs like a roller swap ($110 – $220) or track realignment ($120 – $240) sit near the bottom. Multi-part repairs with a new spring, cable, and panel climb toward the top. Call (844) 944-1933 for a free estimate on your door.
How much does spring replacement cost in Newton?
One spring is typically $180 – $340 in Newton. Most doors use a matched pair, and those are replaced together, so a pair costs about twice that range. Because spring work is hazardous, it should be handled by a trained technician rather than attempted at home. Call (844) 944-1933 for a free quote.
How much does a new garage door cost installed in Newton?
New door installation in Newton typically ranges from $700 to $2,200 installed. A standard single-car door sits toward the lower end. A wider double door in a heavier material, or one paired with a new opener ($250 – $550), lands near the top. Call (844) 944-1933 and we’ll walk you through the options.
Is it cheaper to repair or replace my garage door?
Repair is usually cheaper when the door itself is fine and one part failed: a spring ($180 – $340), a cable ($130 – $250), or an opener fix ($120 – $320). Replacement makes more sense when the door is structurally damaged or the panel is no longer made. A single-panel replacement at $250 – $500 is often the middle ground. Call (844) 944-1933 for an honest read on both.
Can you come today?
Yes. We offer same-day service and fast dispatch from 7am to 7pm, and a free estimate on the spot. If your spring or cable has failed, don’t run the door in the meantime. Call (844) 944-1933 and we’ll get a technician out to look at it.
Ready for a Free Estimate?
A broken spring, a noisy opener, or a door that won’t close all the way is a repair you want handled by someone who does this every day. Call (844) 944-1933 for a free estimate on your Newton garage door. We’ll tell you what failed, what it costs, and whether repair or replacement is the better move, so you can make the call with a clear number in front of you.
Pricing reflects the Newton market as of 2026. Roslindale Garage Door Repair offers free estimates – call (844) 944-1933.
Written by the team at Roslindale Garage Door Repair.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Colleen Norris"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Travis Rhodes"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Dustin Gallagher