Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Repair Cost in Roslindale?
Garage door repair in Roslindale typically costs $150 – $600, depending on whether you’re dealing with a snapped spring, a frayed cable, or an opener that’s finally given up. Most single-visit fixes land in the $150 – $340 range. When the problem is a broken spring, we can usually diagnose and fix it in one visit, and the written estimate we hand you before any work starts is the price you pay.
That lead range covers the common jobs. Door replacement and full opener installation sit outside it, and we break those out line by line below so you can see exactly where your situation falls.
Garage Door Repair Cost Breakdown (2026)
Here’s what the main repair categories run in the Roslindale market right now. These are typical estimated ranges for residential work. Your written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Garage door repair (general) | $150 – $600 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
A note on springs: those prices are for one spring. Most doors have a matched pair, and when one breaks the other is usually on the same clock, so the pair is normally replaced together. That puts a two-spring job at roughly twice the single-spring range. We’ll tell you honestly whether you need one or both.
What pushes a job toward the top of its range? Rusted or stripped hardware that has to be cut out, a door that’s come off its track and needs re-hanging, or a panel that’s cracked in a spot where the section has to be ordered. What keeps it low? Straightforward swaps on parts we can source quickly, especially when the opener is one of the eight major brands we know well.
What Affects Garage Door Repair Pricing in Roslindale
Roslindale’s housing stock shapes garage door costs in ways a flat national price list won’t capture. Most of the neighborhood’s garages sit behind older homes, and plenty of them were built for cars that were smaller than what’s parked there now. That history shows up in the price.
- Age and type of the door and opener. A newer LiftMaster or Chamberlain opener with a clean fault is a quick fix. An older unit with a burned-out logic board or a stripped gear can turn a $120 job into a $320 one. The closer your equipment is to the brands we service regularly, the faster we diagnose it.
- Torsion versus extension springs. Torsion springs sit on a shaft above the door; extension springs run along the sides. Torsion work takes longer and carries more risk, so it sits higher in the range. Plenty of Roslindale garages still have extension springs, which changes the job.
- Single versus double door. A double-wide door carries more weight and more hardware, so cables, springs, and tracks cost more to service than on a single-car door. It’s not a huge jump, but it’s real.
- Weather and seasonal wear. Roslindale gets hard freezes and heavy snow loads, and freeze-thaw cycles work on metal and lubricant alike. Springs fatigue faster, rollers stiffen, and tracks can shift when the ground moves under a garage slab. Doors that took a winter of plowing spray and road grit near the apron often need more than one fix.
- Whether the door is off its track or off its springs. A door hanging crooked from a bent track is a track realignment job. A door that won’t lift at all usually means a spring or cable failure. The diagnosis changes the price, and a proper diagnosis is why the first visit matters.
- Parts availability and brand. Because we work with Clopay, Amarr, Wayne Dalton, Raynor, Genie, and Craftsman equipment as well as LiftMaster and Chamberlain, we can usually source the right component without a special order. That keeps a repair from stretching into a second visit.
One more factor that surprises people: what looks like one problem is often two. A door that slams down hard can crack a panel and wear a roller at the same time. We diagnose the whole door, not just the part you called about, so you’re not paying for a second visit a month later.
What Does a Spring Repair Cost in Roslindale?
Spring repair in Roslindale runs $180 – $340 for one spring. A matched pair, which is what most doors need, lands at about double that. This is the repair we get called for most, and it’s the one general handymen usually turn down.
There’s a reason for that. Torsion springs are under heavy tension, and a spring that lets go while someone is working on it can cause serious injury. We don’t publish step-by-step instructions for adjusting or replacing springs, because this isn’t a safe DIY job. Our technicians are trained specifically for spring work, and it’s a big part of why we exist as a garage-door-only operation rather than a broader repair service.
You’ll know a spring has failed when the door feels dead when you pull the opener release, or when you hear a sharp bang from the garage. Don’t keep running the opener on a door with a broken spring; the motor will strain and can burn out, turning a spring job into a spring-plus-opener job. Call us at (844) 944-1933 and we’ll get it looked at.
How Much Does Opener Repair or Replacement Cost in Roslindale?
Opener repair in Roslindale typically costs $120 – $320, and a full opener installation runs $250 – $550. Whether you repair or replace usually comes down to the age of the unit and whether the fault is mechanical or electronic.
Common opener problems we see: the door reverses for no clear reason, the remote only works up close, the motor hums but the door doesn’t move, or the unit trips its breaker. A gear or logic board replacement sits in the repair range. A unit that’s already had two repairs is usually a candidate for replacement, and the difference in cost between a repair and a new installation isn’t as wide as people expect.
If you’re weighing it: replace when the opener is old, noisy, and has already been repaired once or twice. Repair when it’s a newer unit with a single clear fault. We’ll tell you which side of that line you’re on before we touch anything.
How Much Does a New Garage Door Cost in Roslindale?
A new garage door installed in Roslindale typically costs $700 – $2200. Where you land depends on door size, material, insulation, and whether the existing frame and opener need updating at the same time.
A single-car steel door sits near the bottom of that range. A double door, a carriage-style door, or an insulated door with windows moves toward the top. We work with Clopay, Amarr, Wayne Dalton, and Raynor doors, so we can match a replacement to the style of your house rather than dropping in a generic panel. If the existing opener is working fine, we’ll reuse it. If it isn’t rated for the weight of the new door, we’ll say so.
One thing worth flagging: Roslindale’s older homes often have non-standard garage openings, and a door that doesn’t fit the opening is a headache. We measure the actual opening, not the old door, before anything gets ordered.
How to Save on Garage Door Repair
A few practical ways to keep the bill down without cutting corners on safety:
- Get the problem diagnosed before parts are ordered. Guessing at the cause is how people end up paying for a part they didn’t need. A proper diagnosis on the first visit is the cheapest thing you can do.
- Lubricate rollers and hinges. A little garage-door lubricant on the moving parts a couple of times a year keeps things from seizing, especially through a Roslindale winter. It won’t fix a worn roller, but it slows the wear.
- Keep the tracks clear. Dirt and grit near the door apron cause rollers to bind. A clean track means less strain on the opener and springs.
- Address a small issue before it grows. A noisy roller or a slightly bent track is cheap to fix. Left alone, it can wear the opener or crack a panel, which pushes the job into a higher range. Book a repair before the small thing becomes the big thing.
- Ask for a written estimate up front. We give free estimates, and the written number is the number. Call (844) 944-1933 and we’ll tell you what the job involves and what it costs.
If you’d like to understand the full scope of what we handle, our garage door repair page lays out every service. And if you’re comparing us to a general handyman, it’s worth knowing that most won’t touch spring or cable work at all. When a repair stalls because the person you called can’t do the job, that delay is its own cost.
Why Choose a Garage Door Specialist in Roslindale?
Because garage doors are the only thing we do. That focus shows up in the price in a few ways: we diagnose faster, we carry the knowledge for the eight brands we regularly service, and we don’t bounce you to a second contractor when the job turns out to be springs rather than tracks. A handyman who “also does garage doors” is working from a generalist’s playbook; we’re working from a specialist’s.
Our technicians have up to 14 years of experience, and they’re trained for the dangerous jobs, including torsion and extension spring work that many general repair services decline. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor equipment, and we can supply individual parts if you’re handling a repair yourself or need a component between visits. One call covers everything from a single roller to a full new door. Visit Roslindale Garage Door Repair to see the full range of what we do.
We also know that price is only half the question. The other half is whether the job gets done right the first time. Brand familiarity and single-trade focus are what reduce repeat calls, and a repair that holds is cheaper than one you have to pay for twice.
FAQs – Garage Door Repair Cost
How much does garage door repair cost in Roslindale?
Most garage door repairs in Roslindale cost between $150 and $600. The final number depends on the part that failed, the type of door, and how much related wear the job uncovers. Call (844) 944-1933 for a free estimate; the written quote sets the price.
Is it cheaper to repair or replace a garage door?
Repair is almost always cheaper for a single failed component, and most repairs fall in the $150 – $600 range versus $700 – $2200 for a new door installed. Replacement starts to make sense when the door is structurally damaged across multiple panels, or when repairs keep stacking up. We’ll tell you which is the better value for your door.
How much does a broken spring cost to fix in Roslindale?
Spring repair is $180 – $340 for one spring, and most doors need a matched pair, so expect roughly double for a two-spring job. Don’t run the opener on a door with a broken spring; call (844) 944-1933 and we’ll get it fixed safely.
Can you come today for a garage door repair?
Often, yes. Same-day service is the goal for urgent jobs like a door stuck open or a snapped spring, and free estimates are available. Call (844) 944-1933 and we’ll tell you what we can do for your door in Roslindale.
Why does a garage door repair cost more than I expected?
Usually because a second problem showed up alongside the first. A failed spring can wear a cable; a misaligned track can stress the opener. Jobs in the upper part of the $150 – $600 range typically involve more than one component. A written estimate before work starts means no surprises. Call (844) 944-1933 for a clear breakdown.
Pricing reflects the Roslindale market as of 2026. Roslindale Garage Door Repair offers free estimates. Call (844) 944-1933.
Written by the team at Roslindale Garage Door Repair.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Colleen Norris"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Travis Rhodes"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Dustin Gallagher