Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateGarage Door Services in Newton, MA
Newton garages are a different animal from what most installers expect. A lot of the doors we work on here hang in carriage houses and detached garages tucked behind homes in Newtonville, Waban, and Newton Centre, and many of those openings aren’t the standard 8×7 a box store sells. If your door is stuck, off its track, or making a noise that wasn’t there last week, call (844) 944-1933 and we’ll get a technician out to look at it. Our technicians have up to 14 years of experience, and garage doors are the only thing we work on. A free estimate and an exact quote come first, and you’ll know the price before any tool comes out of the van.
Why Newton Homeowners Choose Roslindale Garage Door Repair
We’re a single-trade shop. That means the person who shows up at your door in Newton has spent their working life on garage doors and openers, not fitting in a door between gutter jobs. We’re factory-familiar with the brands actually installed on Newton homes, including LiftMaster, Chamberlain, Genie, and Raynor, so diagnosis is usually straightforward and the correct part gets sourced without trial-and-error. No second visit because the wrong spring or bracket arrived.
That specialization matters most on spring work. Torsion and extension springs are under serious tension, and general handymen often decline the job for good reason. We do it as routine work, safely, with the right winding bars and the door secured first.
Homeowners in Newtonville and Nonantum call us because one call covers the whole job: repair, opener problems, springs, a new door, or just the part you need. We don’t hand you off to another contractor halfway through. Our technicians have up to 14 years of experience, and we work clean and leave the garage the way we found it.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Garage Door Services We Offer in Newton
Every job in Newton starts with a real look at the door, the springs, the tracks, and the opener, not a guess over the phone.
Garage Door Repair
Bent tracks, snapped cables, doors that come down crooked, or panels dented by a car in a tight driveway: we diagnose and fix in one visit whenever the part is on hand. Newton’s tight lots and narrow driveways mean alignment issues come up often, and small problems get worse fast. Learn more about our garage door repair in Newton.

Garage Door Opener Repair
An opener that reverses for no reason, runs but won’t lift, or grinds at the top of travel usually has a specific cause, and we know the common failure points on LiftMaster, Chamberlain, and Genie units. Safety sensors, logic boards, gears, and limits all get checked before we recommend anything. Learn more about our garage door opener repair in Newton.

Garage Door Installation
Replacing a door in Newton means measuring the rough opening first, because a lot of the old garages in this city aren’t built to a standard size. We measure, order the right door, and install it to fit properly. Learn more about our garage door installation in Newton.

Garage Door Spring Repair
Torsion and extension springs take the full weight of the door, and when one lets go the door becomes unsafe to operate. We replace springs as matched pairs, balance the door afterward, and test the whole system. This is the work we’d tell you never to attempt yourself. Learn more about our garage door spring repair in Newton.
Garage Door Parts
Sometimes you need a roller, a bottom seal, a hinge, or a sensor bracket and nothing more. We supply parts directly so a small repair isn’t delayed waiting on a third-party order. Learn more about our garage door parts in Newton.
Neighborhoods We Serve in Newton
We work across Newton’s villages, and drive times here are short once we’re in the area. The older neighborhood streets can be tight, so give us a heads-up if your driveway is steep or hard to turn into.
- Newtonville – lots of detached garages behind older homes
- Newton Centre – carriage houses and narrow single-bay openings
- Waban – mature trees, shaded driveways, and older hardware
- Nonantum – tighter lots with garages close to the property line
- Auburndale – mix of early electric and modern openers
If you’re in one of these villages, we can typically get a technician out the same day for urgent repairs, and we offer fast dispatch from 7am to 7pm.
Why Newton’s Climate & Housing Affect Garage Doors
Newton is largely a stock of 1890s to 1930s Victorian, Colonial, and Tudor homes, and many of those garages still have their original narrow 8-foot openings and old hand-operated or early electric hardware. Some were built for a Model-T-era carriage. That means the opening can be an odd size like 7’6″ by 7′, and a technician who doesn’t measure the rough opening first will lose on the install with a door that doesn’t fit. We measure every time.
Then there’s the weather. New England freeze-thaw cycles and heavy wet snow load wear a door down: bottom seals tear, tracks rust, and frozen thresholds with ice damming around old concrete aprons are the most common winter failure points in Newton. Add the mature tree canopy and steep, tight driveways, and a quiet, well-balanced door with a healthy torsion spring stops being a luxury and becomes a daily safety need. If a door is binding or slamming, it’s telling you something.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door in Newton
Every job is priced per estimate, and the written quote sets the final price. Here’s what the work typically runs in the Newton market:
| Service | Typical estimated range |
|---|---|
| Torsion spring replacement (one spring) | $180 – $340 |
| Matched spring pair | About twice the single-spring range |
| Opener repair | $120 – $280 |
| Track, cable, or roller repair | $150 – $350 |
| New door installation (standard size, measured) | $900 – $2,400 |
| Custom-fit door for a nonstandard opening | Quoted after measurement |
Custom sizes cost more because the door is built to fit. We measure first and give you a written price before ordering anything. Estimates are free, so call (844) 944-1933 to get one.
Service Area – Cities Near Newton
Newton sits close to several of the neighborhoods and towns we cover. If you’re just over the line, we can help in Brighton, Allston, Brookline, and Fenway too. If you’re outside these, call and we’ll tell you honestly whether we can get to you. Our home base is Roslindale Garage Door Repair, and Newton is a regular part of our week.
Serving Newton, MA – Our Local Coverage Area
We serve Newton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Garage Door in Newton
Most garage door repairs in Newton run roughly $120 to $350, depending on the part and the problem. Spring replacement is a bit more because springs are usually replaced in pairs. You’ll get a written quote and a price agreed before any work starts, so the invoice matches the estimate. Call (844) 944-1933 for a free exact quote.
Yes, urgent repairs in Newton can often be handled the same day if you call early. Doors stuck open are a security problem, and a door that won’t close is a safety hazard, so we prioritize those. Call (844) 944-1933 and we’ll tell you when we can get there.
No, not after we’ve quoted it. The only time a price changes is if we find something the estimate didn’t cover and we talk it through with you first. You approve any change before we touch it. That’s how we keep the price on the invoice equal to the quote. Call (844) 944-1933 to schedule.
Because a lot of Newton garages were built well before standard 8×7 doors existed, sometimes for an early carriage. Openings come in sizes like 7’6″ by 7′, which need a custom-fit door. We measure the rough opening before recommending anything, so you don’t end up with a door that doesn’t fit. Call (844) 944-1933 for a free measure and quote.
The local professionals we connect you with are licensed and insured as their state requires. Our technicians have up to 14 years of experience and work on garage doors exclusively. For any job, call (844) 944-1933 and we’ll walk you through the estimate.
Get a Free Estimate in Newton
Whether it’s a snapped spring, an opener that won’t behave, or a new door that actually fits your older garage, we’ll take a look, explain what’s wrong, and quote the job before we start. Call (844) 944-1933 for a free estimate and upfront pricing. We’ll get you a written quote and get your door working reliably again.
Written by the team at Roslindale Garage Door Repair.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Newton Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Colleen Norris"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Travis Rhodes"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Dustin Gallagher