Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Cost in Fenway?
Garage door work in Fenway typically costs somewhere between $150 and $600, depending on what’s actually wrong. A simple repair like a new set of rollers or a track adjustment lands near the bottom of that range. Spring replacement, cable work and opener repairs sit in the middle. If the door itself needs panels or a full replacement, the number climbs well past $600 and into the $700 to $2,200 bracket for a complete new door. The written estimate you get before any work starts sets the final price.
We’re a garage door specialist, not a handyman service or a big-box installer, so the person who shows up spends the whole day on doors and nothing else. Our technicians have up to 14 years of experience, and they’re factory-familiar with LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor equipment. That matters in a neighborhood like Fenway, where a lot of the housing is older and the doors bolted to it are a mix of vintages and brands.
Call (844) 944-1933 for a free estimate. We can work with your schedule to get a technician out for a same-visit diagnosis, and we can work with your insurer if the problem started with an impact or a break-in.
Garage Door Cost Breakdown (2026)
Here’s how the numbers shake out across the services we handle in Fenway. These are typical estimated ranges for the Fenway market in 2026, not a quote. Your written estimate is the price.
| Service | Typical Estimated Cost | What Usually Drives It |
|---|---|---|
| Garage Door Repair (general) | $150 – $600 | Which component failed and how many parts the job needs |
| Spring Repair (one spring) | $180 – $340 | Torsion vs. extension, spring size, door weight |
| Cable Repair | $130 – $250 | Cable length, drum condition, whether the door dropped |
| Opener Repair | $120 – $320 | Board, gear, logic board or just a remote and sensor issue |
| Opener Installation | $250 – $550 | Belt vs. chain drive, smart features, door weight |
| Panel Replacement | $250 – $500 | Section size, profile, whether an exact match still exists |
| Track Realignment | $120 – $240 | How far the track bent and whether the framing moved |
| Roller Replacement | $110 – $220 | Number of rollers, nylon vs. steel, noise concerns |
| New Door Installation | $700 – $2,200 | Door size, material, insulation, opener included or not |
Two things push the number up more than anything else: springs and door replacement. A spring repair priced at $180 – $340 is for one spring. On most doors the two springs are a matched pair and get replaced together, so a pair runs roughly twice that range. We won’t quote you for one when the door clearly needs both, and we’ll explain why before anything is ordered.
On the low end, a roller swap or a track adjustment is often a single-visit fix. On the high end, a full new door is a bigger project with removal, disposal, new hardware and a fresh opener if the old one won’t carry the new door’s weight. We stock parts directly as a standalone service, so most jobs don’t stall waiting on a third-party supplier to ship something in.
What Affects Garage Door Pricing in Fenway
Fenway is a dense, old neighborhood with a lot of conversions, additions and tight lots, and that shows up in garage door pricing more than people expect. Here’s what moves the number:
- Door age and brand. A door from the 1970s or 1980s may have hardware that’s no longer made. If it’s a Clopay, Amarr, Wayne Dalton, Raynor or Craftsman door, we can usually identify it quickly and source correct parts without trial-and-error. If it’s an obscure older model, a panel or a bracket may take a special order, which adds time and cost.
- Torsion vs. extension springs. Torsion springs sit on a shaft above the door and handle more weight, which means a heavier duty spring and more careful adjustment. Extension springs run along the sides and are usually a bit simpler to work on. Fenway’s older garages tend to have one or the other depending on when the door was last replaced.
- Access and overhead clearance. Fenway garages are often squeezed into tight footprints, sometimes behind a shared driveway or under a building. A low-clearance door or a door with limited headroom above the track needs a different opener and sometimes a different track setup, and that adds labor.
- Opener type and wiring. A belt-drive opener with safety sensors is a straightforward install. A door with old wiring, a missing safety reverse or a garage with no outlet near the unit needs more work. We can also supply parts directly if you want to handle a small fix yourself, but for anything involving a torsion spring or a live electrical connection, that’s a job for a trained technician.
- Whether the door is worth repairing. A door with one bent panel, a noisy roller or a tired opener is usually a repair. A door with cracked panels, rusted through the bottom section, or a bent track after an impact is often better replaced. We’ll tell you which side of that line your door is on instead of pushing the bigger job.
- Impact and storm damage. Hail is uncommon in this part of Massachusetts, so most impact damage we see in Fenway comes from vehicle contact, a fallen limb or a break-in. That kind of damage often bends a panel and knocks a track out at the same time, so the repair covers both.
How to Save on Garage Door
The most reliable way to keep the cost down is to catch the problem before it spreads. A door that’s been noisy for months often needs a $110 – $220 roller replacement now; ignored, the vibration chews up the opener gear and turns a small job into a $120 – $320 opener repair on top. Same with a track that’s slightly out of line: a $120 – $240 realignment today is cheaper than a bent panel and a new set of cables after the door jumps the track.
A few other practical things:
- Get the free estimate before you commit to anything. Call (844) 944-1933 and we’ll give you a written range so you can compare it to the $150 – $600 typical repair bracket.
- Ask whether a repair or a replacement makes more sense. A door that’s structurally sound but has a failed spring is almost always a repair. A door that’s been hit and has multiple bent sections is usually a replacement.
- If only one component failed and you’re comfortable handling it, we can supply parts directly so you’re not searching around for a third party. For springs, cables and anything electrical, leave it to a technician. Those parts are under extreme tension and can cause serious injury without the right tools and training.
- Don’t skip the safety inspection. A door that reverses on the way down or has a frayed cable is a hazard regardless of price, and fixing it now avoids a bigger bill at the worst possible moment.
Is It Cheaper to Repair or Replace a Garage Door in Fenway?
Repair is usually cheaper when the door’s structure is intact. That means the panels are straight, the track is sound and the only real failure is a spring, a cable, an opener or the rollers. In that case you’re looking at the $150 – $600 repair range, or $180 – $340 for a single spring. Replacement only makes financial sense when the door has cracked or rusted panels, a bent track from an impact, or a model so old that parts simply aren’t available. A new door runs $700 – $2,200 typical, but it usually comes with new hardware and a fresh opener, so the comparison isn’t apples to apples. We’ll tell you plainly which side of that line your door is on. Call (844) 944-1933 for a free estimate and a straight answer.
FAQs – Garage Door Cost
How much does garage door repair cost in Fenway?
Garage door repair in Fenway typically runs $150 – $600. The exact figure depends on the part that failed: a roller swap lands near $110 – $220, a cable repair near $130 – $250, and a spring job at $180 – $340 per spring. Call (844) 944-1933 for an exact quote – estimates are free.
How much does a new garage door cost in Fenway?
A new door installation in Fenway typically costs $700 – $2,200. Door size, material, insulation value and whether the opener is included all move the number. The estimate you get in writing sets the final price. Call (844) 944-1933 to book a free measurement and estimate.
Can you come today?
Fenway garage door calls are often same-day, especially for springs, cables and doors that won’t close. Our technicians handle the most urgent failures first, and we can work with your schedule. Call (844) 944-1933 and we’ll find the soonest opening.
Is it cheaper to repair or replace a garage door?
Repair is cheaper when the door’s panels and track are sound: expect $150 – $600 for typical repair work. Replacement runs $700 – $2,200 and becomes the better value when panels are cracked, the track is bent beyond realignment, or parts are no longer made. Call (844) 944-1933 for a free assessment before you decide.
How much does a garage door spring replacement cost in Fenway?
Spring replacement in Fenway typically costs $180 – $340 for one spring. Since the two springs on most doors are a matched pair and usually replaced together, a pair runs about twice that range. Spring work is dangerous and we don’t recommend DIY – the tension in a torsion spring can cause serious injury. Call (844) 944-1933 for an exact quote – estimates are free.
If you’re in Fenway and your door is stuck, noisy, or won’t close all the way, we can tell you what it’ll cost before we touch anything. Our technicians have up to 14 years of experience, we handle the eight major brands (LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, Raynor), and we work on repair, opener repair, spring repair, installation and parts directly – one call covers everything. Free estimates, upfront pricing, and a satisfaction guarantee. Call (844) 944-1933 to get started, or visit Roslindale Garage Door Repair to see what else we cover.
Pricing reflects the Fenway market as of 2026. Roslindale Garage Door Repair offers free estimates – call (844) 944-1933.
What Our Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Colleen Norris"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Travis Rhodes"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Dustin Gallagher